Məhsullar - Controllers

ЛОГОТИП

Haqqımızda
Outdoor lighting
İndoor lighting
Məhsullar

Əlaqə:+994 12 310 14 14

Controllers

Power factor corrector

PANTER PNT-360

PANTER PNT-340

ECOBOX-MINI

More products

LUMiMASTER SLC-NOM

The LUMiMASTER SLC-NOM (Smart Light Controler) is a control unit for smart lighting and dynamic load balancing (DLB) for electric cars and check of exceeding the maximum reserved capacityIt enables autonomous, local and remote management of lighting and charging. This unit works with all of current SEAK modulation units and EV chargers.

Control unit for LUMiBOX and PANTER PNT
Support for integration of electric car chargers with shared power balancing (dynamic load balancing - DLB)
Check of exceeding the maximum reserved capacity
Simple user interface based on built-in web server
Display location of ballasts via google maps
Remote access through ethernet or GSM/GPRS
Built-in Ethernet port and GPRS/EDGE router/4G or 5G (optional)
DIN rail mount

Parameter:
Input voltage: DC 12 - 24 V
IP rating: IP20
Input power: 5,5 W
Communication with user: web interface
Inputs: 4x digital DC 5 - 24 V
Weight: 320 g
Communication interfaces: 2xRS485, Ethernet 10/100 Base T, GSM
Dimensions (LxWxH): 100x110x50 mm

LUMiBOX SLM-1100

The modulator unit LUMiBOX SLM-1100 (Smart Light Modulator) forwards control commands received from a control unit via RS485 through powerlines to luminaires with installed LUMiNODE modules. In case of luminaires equipped with certified drivers compatible with IEC62386 (known as DALI) and LUMiNODE SDM-DIG or LUMiNODE/NEMA7 the unit is able to receive status reports from those drivers and will send them to the control unit.

Two-way powerline communication QM-50-SSI3
Thermal protection and Overcurrent protection
Communication with the controller via RS485 bus (MODBUS protocol)

Parameter:
Input voltage: AC 220 V ~ 240 V; 50 Hz
Operating ambient temperature: -25 °C to +50 °C
Max. operating current: 100 A
IP rating: IP20
Idle consumption16:16 W
Weight: 5 100 g
Interface: RS485, 2-way powerline
Dimensions (LxWxH): 375x136x143

LUMiBOX SLM-160A

The modulator unit LUMiBOX SLM-160A (Smart Light Modulator) forwards control commands received from a control unit via RS485 through powerlines to luminaires with installed LUMiNODE modules. In case of luminaires equipped with certified drivers compatible with IEC62386 (known as DALI) and LUMiNODE SDM-DIG or LUMiNODE/NEMA7 the unit is able to receive status reports from those drivers and will send them to the control unit.

Two-way powerline communication QM-50-SSI3
Thermal protection and Overcurrent protection
Communication with the controller via RS485 bus (MODBUS protocol)

Parameter:
Input voltage: AC 220 V ~ 240 V; 50 Hz
Operating ambient temperature: -25 °C to +50 °C
Max. operating current: 63 A
IP rating: IP20
Idle consumption: 3,3 W
Weight: 1980 g
Interface: RS485
Dimensions (LxWxH): 270x85x116 mm

LUMiBOX SLM-140

The modulator unit LUMiBOX SLM-140 (Smart Light Modulator) forwards control commands received from a control unit via RS485 through powerlines to luminaires with installed LUMiNODE modules. In case of luminaires equipped with certified drivers compatible with IEC62386 (known as DALI) and LUMiNODE SDM-DIG or LUMiNODE/NEMA7 the unit is able to receive status reports from those drivers and will send them to the control unit.

Two-way powerline communication QM-50-SSI3
Thermal protection
Communication with the controller via RS485 bus (MODBUS protocol)

Parameter:
Input voltage: AC 220 V ~ 240 V; 50 Hz
Operating ambient temperature: -25 °C to +75 °C
Max. operating current: 40 A
IP rating: IP20
Idle consumption: 2 W
Weight: 1800 g
Interface: RS485
Dimensions (LxWxH): 270x85x116 mm

Power factor corrector

Power Factor Corrector is a single-phase electronic device designed to compensate the power factor of the network for lines of public lighting on which light sources with electric ballasts are mounted with a backward response along the supply line.

Power line protocol QM-50-SSI3
Max. operating time (switching on) is 5 minutes

Parameter:
Input voltage: AC 220 V ~ 240 V; 50 Hz
Operating ambient temperature: -25 °C to +60 °C
Max. current: 3 A
IP rating: IP20
Power consumption: 2,5 W
Weight: 8 000g
Power line protocol: QM-50-SSI3
Dimensions (LxWxH): 377x170x168mm

PANTER PNT-360

Panter PNT-360 is a three phases device for forwarding control commands through the power lines to lighting devices with installed Seak DIM BAR SDM or SDL modules designed to control them.

Powerline Communication QM-50-SSI1
Communication input RS485 (Modbus)
Temperature protection

Parameter:
Input voltage: AC 220 V ~ 240 V; 50 Hz
Operating ambient temperature: -25 °C to +40 °C
Max. operating current: 63 A/phase
IP rating: IP20
Idle consumption: 9,5 W
Weight: 5100 g
Interface: RS485, SSI
Dimensions (LxWxH): 204x316x123 mm

PANTER PNT-340

Panter PNT-340 is a three phases device for forwarding control commands through the power lines to lighting devices with installed Seak DIM BAR SDM or SDL modules designed to control them.

Powerline Communication QM-50-SSI1
Communication input RS485 (Modbus)
Temperature protection
Possibility to connect external electricity meter

Parameter:
Input voltage: AC 220 V ~ 240 V; 50 Hz
Operating ambient temperature: -25 °C to +40 °C
Max. operating current: 40 A/phase
IP rating: IP20
Idle consumption: 9,5 W
Weight:2600 g
Interface: RS485, SSI
Dimensions (LxWxH): 196x300x120 mm

ECOBOX-MINI

Programmer Ecobox mini is used for dimming sequence programming for the compatible HID ballasts, LED drivers and DIMBAR modules.

Powered by USB
Translating and sending of commands from the Ecostreet app. to the SSI interface
Overcurrent protection
Designed for LUMiBOX modulators and older PNT modulators with a SSI interface

Parameter:
Input voltage: 5 VDC
Operating temperature: -25 °C to +60 °C
Current: 25 mA
IP rating: IP20
Consumption: 0.2 W
Weight: 50 g
Communication interface: USB, SSI
Dimensions (LxWxH): 48x75x13 mm

+994 12 310 14 14
info@ecolight.az

Bakı, Azərbaycan